Whether you are a professional mechanic or just someone who likes to work on your own car, you will need to know how to fit brake lines. This can be a daunting task, but with the right guide, it can be easy. In this article, we will discuss the different types of brake line fittings and how to use them. So, whether you are just getting started with brake line fitting or you are looking for more information on the subject, read on.
What are Brake Lines?
The tubes that carry brake fluid from the master cylinder to the brakes are known as brake lines. They are typically made of metal, rubber, or plastic, and they are connected with fittings. The most common type of brake line is the steel braided variety. These have a layer of steel wire around them that makes them very strong and resistant to expansion. The other type of brake line is the rubber hose variety. These are not as strong as the steel braided lines, but they are less expensive and easier to work with.
When you are choosing brake lines, you need to make sure that they are compatible with the rest of your brake system. If you are not sure about this, you can always consult a professional. They will have the experience and knowledge to help you choose the right brake lines for your car. You can even do this yourself by investing in a brake line fitting assortment kit. This will allow you to try out different sizes and types of fittings until you find the perfect match for your car.
How to Use Brake Line Fittings?
Now that you know what brake lines are and how to choose the right ones, it is time to learn how to use them. The first thing you need to do is identify the type of brake line fitting that you need. There are two main types: compression fitting and flare fitting. The compression fitting is the most common type and is used on most cars. It consists of a nut that is threaded onto the brake line. The flare fitting is less common and is used on some European vehicles. It has a flared end that is inserted into the brake line.
Once you have identified the type of fitting that you need, it is time to install it. If you are using a compression fitting, you will need to thread the nut onto the brake line. Make sure that you do not overtighten it, as this can damage the line. Once the nut is tight, you can screw on the fitting. If you are using a flare fitting, you will need to insert the flared end into the brake line. And once it is in, you can screw on the fitting.
To Conclude
That’s all there is to it! Now you know how to use brake line fittings. With this knowledge, you can easily install brake lines on your own car. Remember to take your time and be careful, and you will have no trouble at all. If in doubt, always consult a professional. They will be able to help you choose the right fittings and install them correctly.
